Search
Generic filters

Whole fish packing system with two conveyor belts

Packing system for whole or H&G fish packing, inside the stainless steel or aluminium trays for subsequent freezing in the Blast Freezer Tunnels.

 

The system integrates two conveyor belts, located in two levels and superimposed:

 

  • Upper level: Conveyor belt or roller track feeding stainless steel or aluminium trays.
  • Lower level: Conveyor belt with modular belt for conveying whole or H&G fish to the packing stations.

 

On both sides of the fish fillet conveyor and at the same level, there are “Tables for fish packing”, designed for the manual work of the operators who take the fish from the conveyor and place it inside the steel tray or the base of cardboard boxes, wrapped in one or two plastic film sheet.

The tables are designed ergonomically so that the operators carry out their work in a comfortable and efficient manner.

The number of tables is designed according to the specification of each project.

Once the freezing tray is full, then the operator manually inserts the tray into the blast freezer tunnels or onto another conveyor belt designed for freezing trays transport, and this will depend on the design of the fish factory.

Empty stainless steel or aluminium tray conveyor belt

  • Roller conveyor belt by gravity or rubber or modular conveyor belt.
  • Located on the upper level of the equipment set for feeding empty trays.
  • Flanged and screwed legs on resistant and stable supports, welded to the deck of the ship, to allow for easy assembly/dismantling of the equipment.
  • Open structure, built with plate and profiles in stainless steel quality AISI-316.

 

Whole or H&G fish conveyor belt

  • Located on the lower level of the equipment set. Whole or H&G fish conveyor belt coming from the head cutting machine.
  • Plastic modular belt conveyor by the Intralox brand (FDA and USDA approved).
  • Belt sliding profiles in plastic approved for use in contact with food.
  • Driven by a Danfoss hydraulic motor, coupled to the traction shaft by means of an elastic stainless steel coupling and Vulcollan star, to give more reliability and durability to the transmission.
  • Variable conveyor speed by means of a hydraulic flow regulator.
  • Fairing on the rotating elements with a protective casing, built in AISI-316 quality stainless steel.
  • Squared section stainless steel shafts, with fretworked sprockets on them and mounted on polyamide bearings with ball bearings and seals.
  • Flanged and screwed legs on resistant and stable supports, welded to the deck of the ship, to allow for easy assembly/dismantling of the equipment.
  • Open structure, built with plate and profiles in stainless steel quality AISI-316.

 

Whole or H&G fish packing tables.

  • The packing tables are ergonomically designed to increase the efficiency of the operators’ work.
  • They are located at the same level as the fish conveyor belt and next to it.
  • They can be fixed or fold-down to enable operators to move past.
  • Supports for freezer trays in reserve stock.

 

Optional equipment for integrating into the packing tables:

  • Control weighing scales for weight of fish.
  • In the upper or lower part of the packing tables frames are located for storing trays of cardboard boxes, plastic, stainless steel or aluminium for packing fish.
  • Supports for plastic rolls.

 

DIMENSIONS

Dimensions of conveyor belts and number of packing tables according to the needs of the process.

You need more info?

Fill up the following form and we will contact you as soon as possible. You can also call us at +34 986 26 64 75

Choose a process

CHOOSE A FISH

we use cookies

This site uses cookies to ensure the best browsing experience. If you accept or continue to browse, you are deemed to have accepted their use